It is usually possible to reconfigure SDA units without the need to return them to Analox. Analox can provide replacement configuration files as necessary for you to upload to your SDA using the SDA PC software.



To install the configuration to the SDA

 

1. Ensure the SDA PC tool is installed on your computer

2. Navigate to the SDA PC tool folder (Usually C:\Program Files (x86)\Analox\SDA Setup)

3. Create a folder named Config within this directory

4. Download the configuration file as supplied by Analox and copy it to the newly created Config folder

5. Power up your SDA unit

6. Enter the SDA menu, scroll down to, and select Power

8. Select sleep

9. Connect your PC to the SDA unit via the supplied USB cable

 

NK_lICtv15BXUuVciz2MQDiGZDn_ZHjvlg.png  sRtHgU6m0RxxmXFKW25-Il4BDHYiwg5vdg.png


9. Run the SDA PC tool

10. Select the 'Advanced' tab, and in the Device Configuration drop-down list, select the configuration file

Jq2AsxROuVINQSihRlcjU4Y8zuo6ysaUxw.png


11. Click 'Configure', and in the warning that opens, select 'OK'

CphnQ-gQA1WGvtjhFmmzHvuFRAiP7UV8Kw.png


12. Disconnect the USB cable and power cycle your device

13. Congratulations, you have successfully reconfigured your SDA































1 Attachment