QUESTION
What should I expect when I switch my O2NE+ /Safe-Ox+ on?
ANSWER
When the Ax O2NE+/ Safe-Ox+ is turned on all lights will flash on and off four times (accompanied by a horn sounding)
The 'Fault' status indicator will then remain lit and the 'Good/OK' will flash briefly every few seconds
After the initial start-up period has expired, the 'Fault' status indicator will turn off
The 'Good/OK' status indicator will be illuminated and flash briefly every few seconds, indicating normal operation
The status indicators on any alarm repeaters will mimic this operation
The display will briefly read '8.8.8.8' on power up before reverting to the O2 reading
Note: The instrument should be allowed to settle for a period of 2 hours before sensor readings stabilise
Please watch the brief video showing device initialisation sequence