O2NE+ / Safe-Ox+

O2NE+ / Safe-Ox+

O2NE+: 4-20mA information
QUESTION Are the 4-20mA outputs: · Continuous or pulse signals  · Is it 5 wire · Do I need a converter   ANSWER The 4-20mA output is a fact...
Tue, 5 Jul, 2016 at 1:50 PM
O2NE+ / Safe-Ox+: Adjusting alarm set points
QUESITON How do I adjust the alarm set point on my O2NE+/ Safe-Ox+? ANSWER The procedure is very similar for setting either Alarm 1 or Alarm 2. ...
Tue, 5 Jul, 2016 at 1:54 PM
O2NE+ / Safe-Ox+: Alarm relays
QUESTION Can I fit two relays to one alarm?   ANSWER Yes, this is possible
Tue, 5 Jul, 2016 at 1:51 PM
O2NE+ / Safe-Ox+: Alarm Testing
QUESTION How do I verify the alarms on the O2NE+/ Safe-Ox+ and what does a unit in alarm look/ sound like? ANSWER To ve...
Tue, 5 Jul, 2016 at 1:53 PM
O2NE+ / Safe-Ox+: BIT
QUESTION Are there any built in tests that I can use to check the lights and horn work on my device? ANSWER The O2NE+ and Safe-Ox+ have a user i...
Tue, 5 Jul, 2016 at 1:53 PM
O2NE+ / Safe-Ox+: Calibration
QUESTION How do I calibrate my O2NE+/ Safe-Ox+? ANSWER A full calibration check should be performed on the Ax O2NE+/ Safe-Ox+ after initial inst...
Tue, 5 Jul, 2016 at 1:53 PM
O2NE+: Calibration frequency
QUESTION How often should I calibrate my O2NE+? ANSWER We recommend that the O2NE+ is calibrated a minimum of every 18 months (as per user manua...
Tue, 5 Jul, 2016 at 1:50 PM
O2NE+: Effected by Helium?
QUESTION Is the 10 year version affected by helium?   ANSWER No, this device is not sensitive to Helium
Tue, 5 Jul, 2016 at 1:50 PM
O2NE+ / Safe-Ox+: Effects of atmospheric pressure changes?
QUESTION Is the 10 yr version affected by atmospheric pressure change like the standard version?   ANSWER No, the O2NE+ / Safe-Ox+ products now ha...
Tue, 5 Jul, 2016 at 1:51 PM
O2NE+ / Safe-Ox+: Initialisation
QUESTION What should I expect when I switch my O2NE+ /Safe-Ox+ on? ANSWER When the Ax O2NE+/ Safe-Ox+ is turned on all lights will flash on and ...
Tue, 5 Jul, 2016 at 1:52 PM