Ax60+

Information regarding the use of the Ax60+ (all variants)

Ax60+ displaying FLT24
When a FLT24 is displayed it usually means that there has been a calibration fail, this may be from a bad manual calibration, or because the environment in ...
Wed, 19 Mar, 2025 at 10:31 AM
Ax60+ COMMS Fault.
A comms fault is a communications fault between the sensor unit and the central display. There are a few potential causes of this, however here are the most...
Thu, 5 Jan, 2023 at 2:02 PM
Ax60+: Fresh air Calibration on CO2 sensor
To complete a fresh air calibration on a CO2 Sensor, follow the procedure below (in both text and example menu map): 1] Ensure the Ax60+ is powered on and...
Thu, 20 Jun, 2024 at 3:24 PM
Ax60+: Cannot mute alarm
Question: My ax60+ will not mute the alarms when still in alarm state? Answer: Any Ax60+ units with version 3.0 software on the Central Display Unit wi...
Tue, 10 Dec, 2024 at 10:18 AM
Ax60+: Safe-Ox+ Changing the O2 cell.
1] Remove the screws from the lid and remove the lid assembly from the base. 2] Remove the connector from the O2 sensor PCB. 3] Rotate the port conn...
Wed, 19 Mar, 2025 at 10:31 AM