Ax60+

Information regarding the use of the Ax60+ (all variants)

Ax60+: How to silence and acknowledge latched alarms
The Ax60+ systems have latched alarms as standard however does have the option of disabling alarm latching. It is our hope that the following information wi...
Tue, 15 Nov, 2022 at 10:08 AM
AX60+: How do I disable the Alarm sounders?
A few customers have asked whether it is possible to disable the sounders on their Ax60+ alarm units. Unfortunately this is not possible through the device...
Tue, 15 Nov, 2022 at 10:20 AM
How do I connect multiple sensors to the Ax60+ central display unit (hardwired)?
The Ax60+ installation and commissioning processes are fully described in the Ax60+ user manual and more succinctly in the Ax60+ quick start guide. All rele...
Thu, 29 Apr, 2021 at 2:26 PM
What should I do if my Ax60+ has a FLT16 on the display?
All relevant Ax60+ document information can be found on the Analox Sensor Technology Website, take a look at the Ax60+ product page. There are two poten...
Mon, 15 Jul, 2019 at 11:53 AM
Q: Can the Ax60+ be used in an oxygen rich, HAZMAT class 1 or ATEX area?
A:   The Ax60+ is designed to warn in the event of an oxygen leak so that action can be taken to reduce harm. The Ax60+ is not suitable for an area with co...
Tue, 2 Feb, 2021 at 3:40 PM
My Ax60+ is displaying FLT06
FLT06 is where the sensing element has not initialised properly, the main causes for this is usually the sensor unit. The first thing to test is to turn the...
Tue, 21 Jun, 2022 at 2:42 PM
Ax60+ displaying FLT16
The FLT16 code on the Ax60+ usually occurs from 2 main issues, the first and more common is a failure in the automatic zero calibration. This is only the mo...
Wed, 19 Mar, 2025 at 10:32 AM
Ax60+ displaying FLT03
The most common issue that creates a FLT03 on the Ax60+ is that there is a communications fault between the sensing element and the sensor unit, likely due ...
Wed, 19 Mar, 2025 at 10:32 AM
Ax60+ displaying FLT09
With a FLT09 the most common issue is a failure in the sensor (as the sensor is in need of reprogramming). The first step is to do a power cycle of the devi...
Wed, 19 Mar, 2025 at 10:32 AM
Ax60+ displaying FLT17
A FLT17 code is created when the sensor unit is not configured for the attached sensing element. For example, when fitting an O2 sensor the sensing unit mig...
Wed, 19 Mar, 2025 at 10:31 AM